Many Canon Printer users, searches the solutions to Fix Canon Printer Error Code 5b02, to get rid the worrisome situation. Well, the error indicates that the Waste Ink Absorber is full. Because the printer doesn’t see the sponge absorber, it just counts the number of prints and when a set number is reached, the error code is triggered and the printer locks up. To clear the error then, all you have to do is to reset the counter, but if you do not take care of the sponge, the printer will start leaking ink from the bottom (may be months before you see this). Then don’t worry about it, if you are unable to solve this issue by your ends. Just contact at Canon Printer Tech Support Number to connect with professionals, and get instant help & service to remove the error.
Therefore, here’s, defined two possible methods for resetting Error Code 5b02 in Canon Printer:-
Methods to Fix Canon Printer Error Code 5b02:-
Before starting the procedure, from the “Service Tool”, make sure that have paper loaded, then follow these steps now.
Step 1:-Select “Region” Option
Go to “Set Destination” section, and then hit the drop-down arrow (JPN) in front of “Region”, and then select “USA” option. Then click “Set” option (you get “The function is fished)
Step 2:- Hit Set-Printer Prints One Sheet
Then, go to “Clear Ink Counter”, and then click the drop-down arrow (Main) in front of Absorber: and then choose “Main-Black”, and then hit “Set” option (The printer prints one sheet).
Step 3:- Hit Set-Printer Prints One Sheet Another Sheet
Next, you will need to go to the “Ink Absorber Counter” section, and then click the drop-down arrow (Main) in front of “Absorber”, and then select “Main-Black”, and then hit “Set” option (The printer prints one sheet another sheet).
Step 4:- Click “EEPROM” Option
Go to “EEPROM” section, and the printer prints one sheet.
Step 5:- Select “Auto” Option
Now you need to click “Auto” on the top right of the “Service Tool Window”.
Step 6:- Click “Test” Print
After that do a simple click “Test Print”, and then wait until all is done.
Then restart the printer and you should be good to print again.
The following instructions will enable the user to perform the reset mentioned above.
Step 1:- Unplug the Power Cable Of Canon Printer
First, unplug the power from the Canon printer and all connections (including USB to the PC as well).
Step 2:- Hold the “Start” Button
Next, press and hold the “Start” button while plugging the power back into the printer.
Step 3:- Press the “Resume” Button
While still holding the “Start” button, press the “Resume” button twice (which then allows for Removal of Ink Cartridges (if you are past the limit otherwise leave them in).
Step 4:- Repeat Steps
Now you need to do to repeat Step 1 and then repeat Step 2 above.
Step 5:- Resume Button
Then you need to press the “Resume” button 4 times (note that the light will only blink the first two times of the four times that you press the button)
Step 6:- Check Error Is Fixed
The error should now have cleared so that you can use the printer.
After performing all the above steps, your Canon Printer Error Code 5b02 will surely fix.
Related blog How to Fix Canon Printer Error Code 5800?
In any case, the problem still appears, and then you must take Canon customer service experts help in contacting Canon Customer Service Number.
Avail 24×7 Online Help, Dial Canon Customer Support Number Now
Get in touch with canon printer technical support to join with a team of dedicated and brilliant Canon customer support professionals. This number is toll-free and available 24×7/365 days to give you quickly help & support to your Canon printer technical issues. The experienced technicians will help you in resolving any kind of complicated or complex Canon technical errors/issues with the reliable and optimized solution in a less time. Hence, connect now with experts to get instantaneous help.