Category Archives: Canon Printer

Call On Our Technical Support Phone Number For Canon Printer

03Jan/20

Canon MP495 Wi-Fi Setup | Introduce The Quick Setup Guide

Canon MP495 Wi-Fi SetupCanon MP495 is a wireless inkjet all in one printer, that is designed to provide resolutions up to 4888×1200. With the help of this Canon printer, you can easily adjust and correct the photos before printing them.

Apart from this, the Easy-Web Print Ex software helps you to combine and edit multiple web pages. However, to use these features, you need to know the proper Canon MP495 Wi-Fi setup procedure.

If you don’t have any idea about the setup procedure, then here you will get the steps that will make the printer functional.

How to Set Up Wi-Fi on Canon MP495? 

You can complete the setup procedure by using either the WPS method or the Standard method. Based on your preference you can choose among the 2 methods.

WPS Method:WPS Method to Set Up Wi-Fi on Canon MP495

 Before you start, the following condition must be met.

  • Your router or access point must have a WPS button. For that, check the user’s guide.
  • The network must use the WPA or WPA2 protocol. 

Now, implement the steps listed below:

Step 1

First, ensure that the Canon MP495 printer is turned on. After that, you should press and hold the Maintenance option for 5 to 10 seconds and ensure that the LED starts blinking.

Thereafter, press and hold the ‘Fit to Page option’ for sometimes. Wait for 2 to 3 minutes and then, press the WPS button.

Depending on the router, the position of the WPS button may vary. However, most of the time, you can see the WPS button at the backside of the router or the access point.

Step 2

The Wi-Fi lamp of the Canon printer will flash while it trying to connect to the access point. Once, the wireless connection has been successfully completed, then the LED light will be blinking for 3 seconds.

Now, you have to change the number to 1. Ensure, that the Wi-Fi lamp on the Canon MP495 printer is also lit.

Step 3

Sometimes, Error E,2,1 shows on the display. If after pressing the WPS button the setup procedure does not get complete, within 2 minutes, then this error code can occur. 

In such a condition, you should either press the ‘Black’ or the ‘Colour’ button in order to remove the error. After that, repeat the above two steps.

Step 4

In case, Error E, 2, 3 appears on the display, then it simply means that multiple access points are recognized. In such a scenario, you need to wait for sometimes and again try to configure the WPS settings.

Step 5

Once you have successfully applied the above four steps, now its time to confirm that the Canon MP 492 pinter is connected with the Wi-Fi network.

For that, first, ensure that the Canon printer is turned on. After that, insert a set of A4 paper in the input tray. Next, hold down the Maintenance button until the LED lights start blinking.

After that, press the ‘Black’ or ‘Colour’ button and print out the network setting report. On the printing report, check that the Link Status whether it indicates Active and the SSID is the correct name of the wireless network.

Standard Connection:Standard Connection to Set Up Wi-Fi on Canon MP495

This is another way that you can implement to connect the Canon MP495 printer to the Wi-Fi. To do so, take a glance at the following points:

  1. Insert the installation CD on your device. Instantly an installation screen will appear on the display, choose Wireless Connection.
  2. Turn on the Canon printer and ensure that the light is flashing blue.
  3. Now, tap on Connect to the Network option
  4. On the next page, choose WPS for the automatic wireless connection.
  5. Press and hold the Wi-Fi button until the orange light blinking for 2 times.

Click on Next and provide the required information in order to complete the setup and installation procedure.

People Also Ask

  • How to Reset the Printer to the Factory Settings?

    At first, turn off the device. Remove the power cable from the printer. Wait for 30 to 40 seconds and again reconnect it. 

    Now, turn off the printer and after that, you should hold the Resume button for 20 to 30 seconds. Then, the Attention lights will be turned on. Finally, release the Resume button.

  • How can you change the Wi-Fi on the Canon Printer?

    Ensure that the Canon printer is On. Go to the Home Screen and from there choose the Setup option. Now, choose the Settings option. Under Settings, scroll down and select the Device Settings option.

    Thereafter, choose the LAN Settings button. Tap on the Wireless Direct option. Thereafter, configure the settings. Finally. Press the Home button.

  • How do you Connect the Canon Printer to the Laptop?

    At first, put one end of the USB cable in the USB port on the Connection panel of the printer. Another end of the cable must be connected to the USB port of the computer. 

    Furthermore, you have to turn on the Canon printer. Next, click on the Start icon and choose Control Panel from the available option. Under the Control Panel, select the ‘Hardware and Sound’ option. 

    Now, select the ‘Add a Printer’ option. Afterward, choose the printer port for your connection. Move to the Driver window and click on the Canon printer option. Now, choose the specific model.

    Select whether or not to share the Canon printer with other devices on the same network. Lastly, tap on the Finish option.

01Jan/20

Get The Step By Step Guidance For Canon MG3222 Wireless Setup

Canon MG3222 Wireless SetupCanon MG3222 is an all-in-one photo inkjet printer. This printer can be connected both wired and wirelessly. With the help of this printer, you can print and scan from anywhere using the built-in Wi-Fi setup. 

This printer offers an Airprint option and this feature will help you to print directly from iPhone, iPad, etc. This printer has an Auto Duplex feature intended to save paper. This printer can not only print but can also copy and scan documents. 

You can print photos and documents quickly. This printer also has cloud links with the PIXMA Google Cloud Print feature. To enjoy all these features, at first you need to know the Canon MG3222 wireless setup

Thus, we are about to discuss the effective and exact guide that can help you to set up this printer. 

Steps You Need to Perform for the Canon Pixma MG3222 Wireless SetupSteps for Canon Pixma MG3222 Wireless Setup

To set up the Canon Pixma MG3222 wireless printer, you need to follow the steps that are mentioned below. 

  1. Check if the printer is compatible with the computer and the router that you intend to connect with. You should not forget to check the manual connection. (The network administrator can assist you regarding the office-based network.)
  2. First, go to the drive to install the CD and then follow the on-screen instructions. (Sometimes, you might not have the CD. Then, you can install it with the help of the properly downloaded files.) 
  3. Make sure that you choose the Wireless Connection or Connection Method Selection display. Then, start to follow all the steps until you find the Setup Procedure Selection display. 
  4. Use the USB Cable to choose the Wireless Setup. With the help of the USB cable, you can perform all the steps until the “Software Installation List” option. 
  5. For installation, select any added software. Then, choose the Next option. From the Quick menu if you install My Image Garden then you will get some additional features. 
  6. Now, install the ‘Drivers and Printer’ software and then fix the USB cable to your device and printer. 
  7. At that time, you will see the Connect Cable option. Locate the Deleted Access Points and choose the one you want to link and click on the “Connect” option. 
  8. After that, go to the Confirm Connection Access Point display to approve the details. 
  9. Check the Disconnect Cable display and then disconnect the USB cable. Finally, click on the Next option.  

Hopefully, with the help of the above-mentioned steps, you will be able to set up the Canon MG3222 wireless printer. 

Frequently Asked Queries 

  1. How to set up the Canon printer wirelessly?

    With the help of the WPS Connection Method, you can set up the Canon printer wirelessly. For that, go through the below-mentioned steps. 

    • First, switch on the printer. 
    • After that, go to the top of the printer and then press the Wi-Fi button. When the alarm lamp flashes, then release the Wi-Fi button. 
    • Check whether the lamp next to this button starts flashing blue. 
    • After that, navigate to the access point and then tap on the WPS button within 2 minutes. 
  2. How do you reset your printer?

    If you want to restore the printer to the factory-default settings, then follow the steps mentioned hereunder. 

    • First, make sure that the printer is turned off. For at least 30 seconds, you need to disconnect the power cable from the printer. Then, just reconnect it again. 
    • Turn the printer On and at that time you need to press and hold the Resume button for at least 10-20 seconds. Then, you will find that the Attention light is turned on. 
    • In the end, release the Resume button. 
  3. How to connect your Canon printer to your phone?

    If you want to connect your Canon printer to your phone, then follow the steps that are mentioned below. 

    • At first, connect your device with the network. 
    • Head over to the iTunes or to the Google Play app store, click on the Canon app. 
    • Now, locate the document or image that you want to print using your Canon printer. 
    • After that, click on the Print option. 
    • Navigate to the Print Preview section of the Canon Mobile Printing and then select the Printer option. 
    • Finally, press the Print option.
01Jan/20

How To Setup Canon MX922 | Get Step-By-Step Guidance

How To Setup Canon MX922 Canon MX922 is an all-in-one inkjet office printer and it offers various attractive features. You can connect this printer both wired and wirelessly. With the help of this printer, you will not only be able to print but also scan documents, along with copying, faxing. 

With the help of this printer, you can print borderless photos within 21 seconds as it offers high speed. Auto-duplex printing and scanning are the key features of this printer. This printer has an automatic document feeder. 

With the help of the AirPrint, you can print wirelessly and also use the Google Cloud Print. But to use these features, you need to know the Canon MX922 setup properly. For that, go through the steps that are mentioned below. 

How to Setup Canon MX922 Wireless Printer

Below discussed are the effective steps that you can follow on your own for the Canon MX922 wireless setup

Use the WPS Method to Connect the Canon PIXMA MX922 Printer to the Network 

You can connect your printer to the network with the help of the WPS method. To use this method, go through the steps cited below. 

  1. First, make sure the network router supports WPS.
  2. For setting up the WPS mode, you don’t need to enter the SSID name and password. 
  3. Check whether your printer is switched on or not. 
  4. Navigate to the Touch Panel and then tap on the Menu button. 
  5. Now, go to the WLAN Setup option and then click on the OK option. 
  6. After that, click on the OK option and then the printer will start to find the access point. 
  7. If a compatible WPS network router is detected, then the touch panel will ask you to begin the printer setup procedure. 
  8. Navigate to your wireless or network router and then hold the WPS button for at least five seconds. 
  9. Thereafter, head over to the printer and then tap on the OK option. 
  10. After opening the “Connected to the Access Point” dialog box, press the OK option. 
  11. Finally, your printer will be connected to the Wi-Fi network. 

Standard Connection Method 

At first, load the CD or you can download and then open the printer’s driver.  After that, according to the operating system follow the below-mentioned steps. 

For Windows Users

  1. After opening an initial dialog box on your device, tap on the Next button. 
  2. When a dialogue box will pop up on the new window, select the connectivity type, and choose the Wireless Connection option. 
  3. Make sure that your printer is switched on and then check whether the printer’s power light is lit or not. 
  4. Thereafter, click on the Next option, followed by the “Connect to the Network” option. 
  5. Navigate to the Dialogue box and then press the Cableless Setup button. 
  6. If you operate through Windows XP, then click on the “Other Setup Method” option. 
  7. Now, hold the WiFi Button until you find that the Alarm light flashes twice. 
  8. Check whether the Blue Wi-Fi lamp flashes quickly or not. Then, make sure that the Green Power Lamp is turned On. 
  9. After that, click on the region name, followed by the Next option and your place of residence. 
  10. Go to the Next button and then choose the software and tools that you want to install. 
  11. Click on the Yes option to select the “End User License Agreement” option. 
  12. Finally, double-click on the Next option and then choose the Complete option. 

For Mac Users 

If you are using a Mac device, then follow the steps that are mentioned below: 

  1. Initially, load the installer CD. For that, check whether your Mac device has an external disc drive or not. 
  2. If you find that the Disc drive is not available, then download the driver. 
  3. Now, install the helper tool and for that tap on the Next button. 
  4. Next, tap on the Wireless Connection button and then make sure that your printer is switched on. 
  5. When you find that the Power Lamp is On, select the Next option. 
  6. Navigate to the “Connect to the network” option and then click on the “wireless setup” option. 
  7. After appearing in the “Connection through Cableless Setup” dialog box, hold the Wi-FI button. 
  8. When you find that the orange light flashes twice, release the Wi-Fi button. 
  9. Now, check whether the Wi-Fi lamp flashes quickly or not and also make sure that the green light is on. 
  10. Go to the Next option and then select your region and your residence. Again, navigate to the Next button and select those tools you want to install. 
  11. Select the Yes option to agree to the terms and click on the Add Printer option. After that, select the Canon IJ Network driver version and then click on the Add option. 
  12. Finally, click on the Complete option to finish the wireless setup process successfully. 

Hopefully, with the help of the above solutions, you will be able to set up the Canon MX 922 wireless printer successfully. 

28Dec/19

How To Override Printer Ink Levels Canon | Follow Easy Guides

how to override printer ink levels canonCanon printers are one of the most chosen printers when it comes to quality printing. But sometimes, you can face issues while printing. As a result, only the blank page will come out of the printer tray. This mostly happens for the insufficient ink level in the ink cartridges

When you notice the blank page error, you will be notified how to override printer ink levels canon with the “low ink” message on the screen. And sometimes, it gets very annoying due to the continuous pops up of messages. Therefore, you need to know how to override printer ink levels Canon as this is one of the most effective ways to overcome the blank page error. Thus, we are providing easy solutions that you can implement to fix the problem. 

How to Override Printer Ink Levels Canon Pixma? 

This section consists of the key methods so that you can override the link levels in the Canon printer. All you need to do is follow the below-mentioned methods to get an easy guide. 

Solution 1: Disable the Low Ink WarningDisable the Low Ink Warning

If you are getting a continuous low ink warning message on the device, then you must stop it. And to do that, you need to go through the below-mentioned steps:

  • Go to the Start button and tap on the “All Apps” section.
  • From there, tap on the “Print” application. 
  • Go to the “Print” application toolbar, choose the “Configuration” or the “Utilities” screen. 

Note: You can also tap on the “Estimated Ink Levels” icon from the Print application.

  • Wait for a while until the printer becomes functional. Now, tap on the “Advanced Settings” option. 
  • Next, click on the “Advanced Configuration” link. A window will appear on the screen next.
  • Check the “Do not show me the Low Ink level warnings” message.
  • Tap on the “Ok” button next to confirm the action. 

Now, exit from the Print Application window. Check if you are still getting the Low Ink Level message on the screen. 

Solution 2: Refill the Ink CartridgesRefill the Ink Cartridges

If you are getting the low ink level message, this simply indicates that there is not sufficient ink in the ink cartridges (in both color and Black). As a result, the print is not coming properly. 

In that case, you need to refill the ink cartridges so that you can print your important documents properly. To refill or remanufacture the ink cartridges, you need to follow the below-mentioned steps.

  • Get a chip rest gadget that matches with the ink cartridges of the Canon Printer.
  • Now, remove the ink cartridge using the user guide.
  • Next, take the cartridge and turn over it. 

Now, you need to set the contacts that are on the chip reset device. After refilling the ink cartridges you won’t get the “low level” ink message in the device. 

Frequently Asked Questions (FAQs)

How to remove the Canon Ink Warning message?

If you are constantly getting the ink warning on the device, you can easily remove it. To do that you need to do the below-mentioned steps:

  1. Go to the Start Button. From there, go to the Control Panel.
  2. In the Control Panel, tap on the “Printers” section. Right-click on it and choose the “Properties” option from the drop-down menu.
  3. Choose the Canon printer device and then tap on the “OK” button next to edit the properties.
  4. Next, move to the ‘Maintenance” tab and search for the “Low Ink Warning” message and then uncheck the box.
  5. Tap on the “Ok” button next to confirm the action.

How to Reset the Ink Cartridge Counter?

To reset the Ink Cartridge, you need to follow the below-mentioned steps:

  1. First, you need to unplug the power cable and the USB cable from the printer.
  2. Next, open the ink cartridge door and then tap on the “Power” button.
  3. Now, reconnect the USB and the power cable back in the printer, holding the Power button.
  4. Shut down the ink cartridge door and then release the Power button slowly. 
25Dec/19

Introduce The Easy Steps For Canon TS3122 Setup

how to setup Canon ts3122 printerCanon TS3122 is an all in one Pixma printer. This printer can be connected both wired and wirelessly. Over the wireless network, you can easily access this printer from any device that you are using. 

Initially, you need to set up the printer at first in order to experience its functions and features. This printer offers you an Airprint option too. You will find Fine Hybrid Ink System in this printer and print from your mobile with the help of the Canon Print App. 

To use all these features, you need to know the HP Canon ts3122 setup process. Thus, you can go through the steps mentioned below. 

Procedure to set up the Canon Pixma 3122 Setup

Below discussed are the effective solutions that you can implement on your own to set up the Canon Pixma TS3122. 

1: Canon Pixma TS3122 Wireless Setup on WindowsCanon Pixma TS3122 Wireless Setup on Windows  

Before starting this setup process, you need to check whether the wireless network and printer are turned on or not. After that, go through the steps that are mentioned below. 

  1. At first, make sure that the light is blinking. Then, you need to stop the blinking and to do that press on the “Stop” option.
  2. After that, you need to tap and hold the Direct button. When you notice the “Settings” option, then release it. 
  3. Now, press the “Direct” button to enter into the Wireless Connect mode. Then, install the software and for that insert the CD. 
  4. Sometimes, you might not have a CD. Then, visit the Canon’s official website to download the installation files. 
  5. Now, go to the “Connect the Printer to Windows PC” option to select the Download option. 
  6. Search and open the downloaded file and then click on the Start Setup option. 
  7. Type the name of your country and the region of your residence, and press the “Next” option. 
  8. Now, read the terms and conditions that software provides and then click on the Agree option, and select the “Yes” option. 
  9. After that, go to the WiFi network to enter the password. Then, press the “Next” option. 
  10. When the connection is completed successfully, check if the installation of the driver is completed. 

2: Connect Canon Pixma TS3122 Wireless Setup to MacConnect Canon Pixma TS3122 Wireless Setup to Mac

If you want to connect the Canon Pixma TS3122 to your Mac device, then you need to follow the steps mentioned hereunder. 

  1. At the time of installing, a message will appear, press the “Agree and Download” option. 
  2. After that, navigate to the downloaded file and click on it to begin the installation process. Go to the “Open” option and then type the password for the printer. 
  3. Thereafter, select the “Start Helper” option and then wait until the software gets installed successfully. 
  4. Then, go to the “Agree” option and choose the name of the wireless network. 
  5. After entering the password, press the “Next” option. Then, wait until the setup processes complete successfully. 

3: Canon TS3122 Wireless Setup without Disk Canon TS3122 Wireless Setup without Disk

You can set up the Canon TS3122 wireless printer without disk by following the steps that are mentioned below. 

  1. Go to the Wireless Network option and select the “Connect” option.
  2. Click on the “Show Character” option. Now, enter the correct details such as Security type, encryption type, and the network security key. 
  3. Then, click on the “Cancel” option and navigate to the backside of your router to open the “Numbered” port. 
  4. Then, connect the printer through the USB cable and tap on the Windows Q option. Go to the Search bar and enter the “IJ Network Tool”. 
  5. Now, turn on the printer and select the Update option. You can view the status of the printer with the help of the “Canon IJ Network” tool. 
  6. Then, go to your Printer and choose the “Configuration” option. Then, choose the “Wireless LAN” option and fill the access point name. 
  7. Go to the Search Results and select the network you use. Then, choose the “Set” option. 
  8. Now, go to the “Encryption Method” drop-down menu to click on the preferred security protocol and then, select the Confirmation option. 
  9. Navigate to the “Get IP Address Automatically” and then press the OK button. 
  10. Now, you need to put a sheet of paper in the paper tray. Go to the Menu and click on the ‘Device Settings” option. 
  11. Select the “LAN Settings” option with the help of the Directional Pad. Then, click on the “Print LAN Details” option followed by the OK button. 

Hopefully, applying the above methods appropriately might help you to resolve the Canon TS3122 wireless setup without any hassle.

25Dec/19

Canon MG3600 Setup | A Step-by-Step Setup Guidance

How to setup Canon MG3600 printerCanon MG3600 is an all-in-one inkjet printer that allows the users to print, fax, copy, and scan from anywhere using the wireless technology. 

But, to make this printer work smoothly and efficiently, the first thing, you have to do is set up the printer. Here, we are going to provide the easy steps through which you set up the printer without much hassle. 

How to Setup Canon MG3600 Printer? 

To perform the Canon MG3600 setup, you can follow the steps stated below. However, before going to perform the steps, remove the protective tape from the packing material to unbox the device. 

Then, remove all the necessary accessories from the box and then place the device in a safe position. After that, collect all the cables that come with your printer. Connect them properly and follow these steps: 

Method 1: Using WPS MethodCanon MG3600 printer setup

You can set up the Canon MG3600 printer easily by using Wi-Fi Protected Setup or WPS method. This method allows the users to connect the printer and computer without using the password and admin name. 

Make sure that your printer has the WPS button and now go through the setup process for the Canon MG3600 printer: 

Step 1: 

In the beginning, turn the printer On and press the Wi-Fi button. Hold it for a few seconds until the ON indicator starts to flash. Afterward, press the Black button and then press the Wi-Fi button once again. 

Step 2: 

After a few seconds, you will see that the Wi-Fi indicator is flashing quickly and the ON indicator is lit. Next, press the WPS button of the router or access point within 2 minutes. 

Now, the device will start to search for the available network. Meanwhile, you will see that the Wi-Fi indicator is flashing continually. The power LED and the Wi-Fi indicator keeps flashing while connecting to the router or access point. 

Step 3: 

Once the device is connected successfully to the router, both the Wi-Fi indicator and Power LED stops to flash and will remain lit. 

Now, you have completed the Canon MG3600 setup. But, in case the device is not connected, you can perform the next method. 

Method 2: Standard Connection Methodsetting up Canon MG3600 Printer

If your router doesn’t have the WPS button, you can perform the steps stated below: 

Step 1: 

First of all, tap on the ‘Start Setup’ option. If you see that you need to update the driver, you can visit the official website of Canon and then download the latest version of the driver. It will take a few minutes to complete the updating process. 

Step 2: 

Now, choose your country and then select the region. Tap on the Next button. Check the box for the terms and conditions to agree to it. Then, click on the Yes button. Afterward, tap on the Next button to allow the Install Wizard process. 

Step 3: 

Next, choose the ‘Wireless LAN Connection’ option and then tap on the Next button. Click on the ‘Connect via wireless router’ and click on the Next. 

Now, confirm that the printer is turned On and then select the ‘Settings printer could not be found on the list’ option. Click on the Next button.

Step 4: 

After that, follow the on-screen prompts to complete the further process. Wait for a few seconds and once you complete the process, tap on the Next button. Lastly, tap on the Exit button to close the window. 

Frequently Asked Question: 

How to Reset a Canon MG3600 Printer? 

You can reset the Canon MG3600 printer going to the Settings window. To do this, press the Stop button from the Operational Panel of the printer and hold it for a few seconds. Once you see that the Alarm indicator flashes 2 times, you can release the Stop button. 

The Settings of your Canon MG3600 printer is now initialized. The admin password set by the IJ Network Tool returns to the default one. After initializing the printer, you have to perform the setup process by following the above-mentioned steps once again. 

22Dec/19

Canon MG3022 Wireless Setup | Get Quick & Effective Guide

Canon MG3022 Wireless SetupCanon MG3022 is a compact and wireless all-in-one inkjet printer. This printer helps you to print, scan, copy documents quickly and simply. 

With the help of this printer, you can print text-heavy documents as well as color photographs. Now, to use its features such as Auto Power On, Built-in WiFi, and the PIXMA Cloud Link, you need to perform Canon mg3022 wireless setup.

Check if the printer has a physical WPS button and ensure if there is secure access to Wi-Fi or not. Here, you get to know the effective way that can help you with the setup process. 

Canon Pixma MG3022 Wireless Setup: Easy Procedure 

Use the easy methods to set up the Canon Pixma MG3022 wireless printer successfully. Therefore, carefully follow the instructions that are mentioned below: 

Canon Pixma MG3022 Printer Setup for Windows Canon Pixma MG3022 Printer Setup for Windows

If you want to set up your Canon printer with any Windows device, then go through the steps that are mentioned below: 

  1. When you connect the printer with your PC, the machine begins the installation process. 
  2. You should not turn on the printer when asked. 
  3. Now, use the USB cable which comes with the package. You need to attach the right end of the USB cable to the printer and your system. 
  4. After that, navigate to the desktop and tap on the Start button. 
  5. Then, go to the Control Panel and tap on the ‘Devices and Printers’ option. 
  6. Go to the “Add a Printer” option and select the “Local Printer” option. Then, find and tap on the port where your printer is connected to the system. 
  7. When the Canon option appears on the screen, double-click on it and select the printer type. 
  8. After getting the name of the printer then select the Next button. 
  9. Sometimes, you might want to keep your printer as a default one. Then, press the Finish option. 

Canon Pixma MG3022 Printer Setup for the Mac Canon Pixma MG3022 Printer Setup for the Mac 

If you want to connect the Canon Pixma MG3022 printer to Mac device, then perform the following instructions: 

You need to switch off the printer first and then detach all the cables from the Mac device. To connect your device, you need to download a driver from the official website of the Canon Pixma. Then, follow the steps mentioned hereunder. 

  1. Initially, navigate to the right corner of the website to open the “Support and Drivers” option. 
  2. After that, click on the list of the product type. Then, select the “Consumer and Home Office” option.
  3. Navigate to the list of the product family and click on the Printers option. 
  4. Go to the “Drivers and Softwares” option and click on the Drop-Down menu to select the Mac Os version that you are using. 
  5. Select the driver and then again choose the file that you will get to see on the new window. 
  6. Next, click on the Continue option twice and then tap on the Install option to add the printer on your Mac device. 
  7. Finally, connect the printer with the Mac device through the USB cable and then turn on the printer. 

How to Setup Canon MG3022 Printer Wireless Connection?How to Setup Canon MG3022 Printer Wireless Connection

With the help of the below-mentioned steps, you will be able to set up the Canon MG3022 printer on WiFi. 

  1. First, tap on the Power button to turn on the Canon MG3022 printer. 
  2. Now, press and hold the Wireless button until you find that the Wireless light flashes. 
  3. Then, press the Color button until you see that the network light flashes. 
  4. Navigate to the CD Drive to load the Setup CD-ROM and install the setup file. 
  5. Now, to begin the setup process, select the Next option. 
  6. Thereafter, accept the end-user License and Agreement and then select the Next option. 
  7. When the Connection Method window opens, then select the Yes option. 
  8. In the end, select the Wi-Fi network connection to enter the Network key. Then, select the OK option. 

Hopefully, applying the above solutions successfully, you will be able to set up the Canon MG3022 wireless printer.

11Dec/19

How To Change Canon MG2500 Ink? [Step-by-Step Guidance]

Canon MG2500 is an all-in-one compact printer, offering superb convenience and amazing printing quality for your office or home purpose. If you are using the printer for quite a long time, then you will need to change the ink cartridge to gain flawless printing experience. 

But, if you are a new user and unaware of how to change the Canon MG2500 ink, then you can go through the below section carefully.

Easy Steps: How to Change Ink in Canon MG2500

Here, we are going to present the easy steps through which you can get to know how to change ink in canon mg2500 easily. So, you can take a quick look at the steps stated below: 

Step 1: 

First and foremost, confirm that you have turned the Canon MG2500 printer On. Afterward, open the cover of the paper tray and remove it. Then, retract the extensions of the output tray. 

Step 2: 

Now, open the cover of the ink cartridge. Then, move it to the replacement position. 

  • Don’t hold the holder of the ink cartridge to move or stop it forcibly and don’t touch it until it stops completely. 
  • The interior of your printer parts may be stained with ink. So, you have to be careful not to stain the clothes or your hands while changing the ink cartridge. 
  • You can use a tissue paper or a wet cloth to wipe off the ink from the inside of the printer. 
  • Don’t touch the metallic components inside the printer. 
  • If you leave the cover open for more than 12 minutes, then the ink cartridge holder may start to move. Thus, do not panic if you see that the Alarm indicator starts to flash. 

Step 3: 

Now, you can remove the empty ink cartridge. To do this, push the ink cartridge down until you hear a beep sound. After that, remove the ink cartridge from their place. 

Next, prepare the new Fine ink cartridge for installation. Remove the ink cartridge out of its packing materials. Then, remove the protective tape from the cartridge gently. 

Note: Don’t shake the ink cartridge while removing from the package. The ink may spill and may stain your surrounding areas and hands, so be careful. 

Step 4: 

Now, you can install the new ink cartridge to the printer. To do this, insert the new ink cartridge into the holder of the ink cartridge. You can install the color ink cartridge into the left slot of the panel. 

Then, place the black ink cartridge into the right slot of the panel. After installing them push them in until they snap into their accurate place. 

Note: Install both the colored as well as the black cartridge. The printer can’t print unless you install both the cartridges. 

Step 5: 

Now, you can close the cover. If you see that the Alarm indicator is starting to flash, then close the cover of the paper tray and take relevant action. The printer may make noise while doing this operation. 

Afterward, you have to adjust the position of the print head and align the print head. Now, you have successfully changed the ink of your Canon MG2500 printer. 

Tips to Remember while Changing Ink Cartridges

  • Don’t touch the print head and the nozzle or electrical contacts of the ink cartridge. If you touch them the printer may not run properly.  
  • After removing the ink cartridge, you have to replace the cartridge as soon as possible. Don’t leave the device with the ink cartridge removed. 
  • It is recommended to use a Fine ink cartridge for replacement. If you install a used ink cartridge, it may cause clogging of the nozzle. 
  • Once you install the ink cartridge, don’t remove it from the printer and leave it out in the open. 
  • To maintain the quality of the optimal printing, you can change the ink cartridge within six months of the first usage. 

FAQ: How to Check the Ink Status of a Printer? 

You can check the remaining ink level of your printer from your computer. To do this, first of all, open the Setup window of the printer driver. Then, navigate to the Maintenance tab and then tap on the ‘View Printer Status’ option.

As a result, it will redirect you back to the ‘Canon IJ Status’ window. Here, you will be able to see the ink status of your printer. You can click on the ‘Ink Details’ option to get further ink-related information.