Category Archives: Canon printer support

Call On Our Technical Support Phone Number For Canon Printer

15Nov/18

Fix Printer Offline Windows 10: Get Best-In-Class Support At Your Fingertips

Until the printer is online no documents prints in the Windows 10 Operating System. This applying on your printer needs anticipation a few seconds to check the status from offline to online. Not necessarily it occurs all the time, but if there is an error, the printer remains offline for a while. This condition occurs even when the printer is online and connected to the device interface. Generally, the display screen freezes surprisingly. You will now note Printer Offline Windows 10 appears with a pop-up message on the display screen stating the printer is offline.

If you are also getting the same problem, then go through this article and understand how to solve Canon printer related difficulty.

Printer Offline Windows 10

Methods to Resolve Printer Offline Windows 10

Review Printer Combination

Restart the device and the printer and then wait till the invention opens. Compare printer connection. If the printer connects with the USB, then check for the printers connections. Check if the cables are attached to the device. If the device connects with the wired network, then check the Ethernet port, it’s related. Also, check the WiFi connections and the broadband signals. If the device attaches to the wireless network, then check the computer networks as well as the router connections.

Compare Printing Status

Restart the printer. On the device and then press on the Windows logo key and the hold the I key together. Select the Devices and then choose the Device and Printers option. Double-click on the icon and check the green mark to view the Printings. Select the gray image and then do not select the green tick. Choose the Set Default Printer option and Continue. Now, right-click to check the status of the printer and choose Pause Printing and Use Printer Offline options. Remove the ticks by clicking on both the possibilities. Check on the Next opportunity and select the printer. This has been seen as one of the methods which can readily remove Printer Offline Windows 10 instantly.

Restart The Print Service

Open the device and then hold on the Windows logo key and the R key simultaneously from the keyboard. In the search bar type “services.MSC” and press the Enter key. Again on the keyboard tap on the P key and locate Printer Spooler option. Check the status of the system. Now, if the situation is not visible then double tap on the Services option and begins the process. Once the process completes then restart the device and check the Properties window. Exit the window after the work ends.

Attach Another Printer

Open the device and then select the Windows logo key and then select the I key from the keyboard. Make sure to press both the keys at the same time. Select the Devices option and then choose on the Printers option. Choose the Printer Properties option by right-clicking on it. Select the Port tab and then select the Add port option. Wait for a while, then select the Standard TCP/IP Port. After the process is over, then choose the New port option and then Continue. Select the Next option and then on the search bar type the IP address of the printer. Select the Next option again. Restart the device and check whether Printer Offline Windows 10 is again showing up.

Related Blog:- How To Fix Canon Printer Not Responding?

Dial Canon Support Number +1-855-789-0295 for Instant Help

Canon Printer Support

Our engineers and technical experts in our panel are enough experienced to provide you with real-time resolutions to each of your issues. Hence, without any hesitation, connect with our professionals to avail a permanent Fix to Printer Offline Windows 10.

You can reach out to us by dialing Canon Printer Support Number our Toll-free service number. Besides that, you can simply shoot an email mentioning all your inquiries to us, and we will get in touch with a fixable solution at the soonest. Also, you can connect through our online audio-video support portals to get effective supervision via live chat. All the services are quite cost-effective.

18Oct/18

How to Troubleshoot Canon MX922 Print Head Errors?

Since the inception of printers, it has seen a lot of changes and it continues to do so till date. Canon is known for producing high performing and top quality printers over the years. One such printer is the Canon MX922. It is the all-in-one printer due to the range of features it provides to users. However, with all its great features, there are issues which creep in from time to time. One common issue that the users often complain about is the Canon MX922 Print Head.

This print head issue is also known as the printer 1403 error. This error message usually appears when the users attempt to print. You may receive a message pop up which says the printer is not installed properly. Also, an incorrect printer message may also display which indicates the print head may not be compatible with your printer.

Canon MX922 Print Head

Probable reasons for the Canon MX922 Print Head Issue

Here is a list of some of the common causes which result in the malfunctioning of the MX922 printer head.

  • Usually, when the print head is not properly installed in the printer, it leads in the print head not working as expected.
  • The print head problems can also occur due to an internal error in the printer or the print head.
  • The MX922 print head 1403 is an indication that the print head might be incorrect. It is probably not compatible with your printer.

These are some of the common causes which result in this issue. However, there are multiple ways you can fix Canon Printer 1403 Error.

Excellent tricks to Fix the Print Head bugs

The error 1403 is usually a symptom of an internal error in the printer. Here are a couple of tried and tested methods which will likely resolve the issue occurring in your print head.

Method 1: Replace the Ink Cartridge

  1. First of all, open up the printer and wait until the cartridge slides over.
  2. Now take out the cartridges from the printer and begin the cleaning process.
  3. With the use of cotton dipped in hot water, clean the print head properly. Make sure to clean the other electronic portions in the ink cartridge as well.
  4. Keep repeating this process until the time there is no drop of ink coming off the ink cartridge.
  5. Allow the printer to dry out after this.
  6. Finally, replace the cartridges and print something from the printer now.

Method 2: Resolving Internal Issues in the Printer

  1. To begin this troubleshooting method, first of all, power on the Canon printer.
  2. Next, Open up the paper tray and pull up the scanning unit. Once done, the print head will advance into a replacement position.
  3. After this, open the inner cover and remove the ink tank by simply pressing the tabs of the tanks.
  4. Lift up the of the print head lock lever and then slightly tilt the print head towards the front side of the print and then take it out with care.
  5. After doing the previous step, progress by putting the print head in the canon mx922 software holder area.
  6. Insert back the ink tanks in the printer properly and close the scanning cover appropriately.
  7. Finally, try to print something from your printer.

Hope above methods are likely to fix your print head error 1403 error. If the problem persists, then the printer requires service.

Related Blog:- How To Resolve Canon Printer Error B200?

Dial Canon Printer Support Number USA +1-855-789-0295 (toll-free):-

Canon Printer Support

Canon MX922 is a delicate printer which performs several printing tasks with high-quality output. Hence, if the Canon Mx922 error still exists, then avail expert help from the printer experts at Canon Customer Service.

We have a bunch of highly experienced technical professionals who are equipped with all the knowledge related to Canon printers. They will ensure your issue is resolved quickly. Get in touch with our experts anytime by calling in our toll-free Canon printer helpline number and receive suitable solutions to your errors.

You may also email us your queries or inquire for quick doorstep service details at our mail id. Customer satisfaction is our priority and this is why we are constantly providing support in a 24×7 manner. In terms of servicing, we offer top quality service to our customers at a very affordable rate. The motto of our support executives is to provide you with accurate solutions to fix the issues on a long-term basis.

29Nov/17

How to Fix Canon Printer Error Code c000?

One of the most frustrating errors since the inhibition of the Canon average device’s range of functions, Canon Printer Error Code c000 indicates that an internal error has aroused with the canon device. However, there are multiple solutions to fix Canon Printer Error Code c800 and its associated devices.

Canon Error Code c000 is a general error message that mainly occurs in a wide range of Canon devices, especially the Canon PIXMA Printer series and other multifunctional devices. Basically error c300 occurs due to an internal issue that restricts the device from its normal functioning. As the error appears because of an internal reason, the possibilities behind the reason are actually uncertain.

Steps To solve Canon Error Code C000 on Canon PIXMA Printers and Multi functional Devices?

Follow the below mentioned effective methods that will help you to fix Error Code c000 on a Canon Printer.  As the reason of the internal issue is unknown, you might need to try multiple methods to troubleshoot the error message effectively.

Method 1: Removing of all packing materials

Sometimes the error c300 code is caused due to not-removed packing materials. So as the printer comes, make sure all the packing materials have been removed from the printer after opening the printer door. Packing materials protective tape and protective polystyrene should be removed from the printer before closing the door. After doing so, check whether the issue still persists or not.

Method 2: Fixing all the ink tanks properly

Another reason that might cause this error to occur is poorly seated or unseated ink tanks. In order to resolve the error, make sure all the ink tanks are properly fixed at their respective places. To do so, open the printer door and check all the ink tanks evenly and reseated them properly to troubleshoot this error c000.

Method 3: Checking for Empty Ink Cartridges

Many times, canon printers show the error c000 when the ink cartridges are empty. To check for empty ink cartridges, open up your printer and check for all the ink cartridges one by one. If any of them is empty, replace it and check for the issue whether it is resolved or not.

Method 4:  Removing of Foreign Objects and Clearing of the Paper Feed Path

The most general reason for error c000 is foreign obstruction or paper jam in the paper feed path of the Canon Printer. Make sure you printer is not suffering from any paper jam. Other than that, remove all the foreign objects from the printer to completely clear all the feed path of your printer. Paper clips and torn pieces of paper can be the cause of this error c000.

If you need any more assistance on how to clear the paper feed path, you can simply contact our Canon Printer Support team to get rid of this error in no time.

Method 5: Resetting of your Canon Device

Related blog How to Fix Canon Printer mp560 Error Code b200?

If none of the above solutions work, resetting of your Canon device can be an effective solution to troubleshoot the error code c000. Resetting of Canon device is not a knotty task. Just turn off you printer and detach all the power cords attached with the printer and wait for approximately 5 minutes. After 5 minutes, re-plug all the power cords and turn on your printer and check whether or not you are still facing the error c000.

Call at Canon Printer Support Phone Number for More Assistance

 

In case, the issue still persists even after following the above mentioned steps, please dial up our Canon Printer Support Phone Number for instant hand to hand help. They will understand you need and avail help as per your error that has bugged your printer. Any canon printer related issues; they are available 24*7 to help you out in distress.

17Nov/17

How to Fix Canon Printer Error Code 5101?

Canon Printer is not working and showing an Error Code 5101 on the computer printer display screen. A Printer error has occurred. When trying to remove the protective material from the printer. Well, many numbers of Canon Printer user’s complaint to get this annoying error code. When this error occurs, the users are unable to work in the proper way. So, if you are facing exactly the same issue, with your Canon Printer, and getting Error Code 5101, then you don’t need to worry about it, in fact it’s time to immediately fix it. As it’s suggested by the Canon Printer customer support team, the issue could be easily fixed. Then you will need to apply the same troubleshooting solutions to fix the issue. Here the blog will guide you quick and easy solutions on How to Fix Canon Printer Error Code 5101?  To do this, just follow the steps here.

Steps to Fix Canon Printer Error Code 5101

Solution 1:- Turn On Power of Canon Printer

When the error code 5101 printer error has occurred. The best suggestion for you to turn off power then back on again.

Follow the steps to do this task:-

  • First of all, disconnect the power cable from the Canon printer while the printer is still ON.
  • Then disconnect any other cables if connected the printer.
  • Press and hold the printer’s power button for 15 seconds.
  • Then the printer should be directly connected to the wall outlet and not to a surge protector. Next, reconnect the power cable to print and the printer should power ON by itself.
  • If the printer doesn’t power ON, then please manually power it ON.

In case, if the problem persists, then you will need to see the manual.” is displayed, the behavior of the print head holder is interrupted.

Solution 2:- Check Your Canon Printer Functionality

You should need to verify that Canon Printer functionality, by the following way:-

  • Ensure that if the Canon printer is connected, Wireless, Ethernet, or USB.
  • Ensure that if the Canon printer is able to make copies of itself.
  • Ensure that if the Canon printer power cable plugged into a surge protector, or directly to the wall outlet.

Solution 3:- Check Securing Material for the Holder Inside the Printer

Step 1:- Check, Is there a securing material for the holder inside the printer?

There may be a securing material for the holder inside the Canon printer. (This material must be removed before using the printer.)

Follow the steps to do this task:-

  • Open the Top Cover of the Canon printer, if the protective material is attached to the holder, remove it.
  • Then remove the securing material for the holder (With the securing material).

Canon Error Code 5101

  • Then, close the cover, and then turn ON the printer again.

Step 2:- Check, Is there a jammed paper or foreign material inside the printer?

You should need to check there is not Paper jam.

Follow the steps to do this task:-

  • Stop printing, then push the power button of the printer to turn OFF the printer.
  • Open the Top Cover of the printer; then,
  • If there is a jammed paper or foreign material inside the printer, remove them.
  • After checking the above items, push the power button to turn ON the printer again.

Note:-

When removing the jammed paper or foreign material, take extra care so that you do not touch the inner parts. Or, it may cause another printing problem.

Step 3:- Check, Is the ink tank properly installed?

You will need to verify that, if there the ink tank is properly installed, it interferes with the operation of the print head.

Get an idea of proper print head position by the below image.

Case 1:- When the ink tanks are not properly installed, then ensure these things:-

  • Make sure that the ink tank is not set firmly.
  • Make sure that ink lamp is not turned ON.

 

Case 2:- When the ink tanks are properly installed

Canon Pixma Error Code 5101

  • Make sure that the ink tank is not set firmly.
  • Make sure that the ink lamp is not turned ON.

Note:-

  • Always remember “Do not touch the Print Head Holder while it is moving.”.
  • Wait until the Print Head Holder automatically stops.
  • Do not even attempt to stop/move the Print Head Holder by holding it.

Related Blog How to Fix Canon Printer Error Code 5100?

If the problem still persists, then you should contact our Canon Printer Customer Support team for immediate get help.

Canon Customer Support Phone Number For Instant Online Help to Canon Issues

You can call at Canon Customer Support Phone Number anytime, which is available 24×7 day and night to your online help. Through number, you will be easily connected with the team of proficient and certified Canon Customer Support, where technicians will give you the perfect and effective services to resolve your Canon technical issues or errors. The professional works day and night to your assistance with every possible solution to get your Canon technical queries resolved in a less time. Hence, connect with experts now to get a further help.

06Nov/17

How To Fix Canon Printer 1403 Error?

Canon printers being one of the most advanced printing brands can also suffer from unexpected error messages and one among them is 1403 .the error code generally appears if the print head is completely damaged. This error usually arises in the Canon MG 6350 model where the type of print head placed inside the printer is incorrect. It is most of the suggested to replace it with a brand new one. While this error code appears, it will spell message which will pop-up as a wrong print head error code 1403, clearly indicating that the print-head has is in a faulty state and needs to be replaced. Below are steps to fix Canon Printer 1403 error with proper explanation.

Steps to troubleshoot Canon printer 1403 error code

Since it is most likely a print head issue which arises inside the cartridges located just in the section of the printer, resolving it with following steps are well recommended:

  • Open the printer and wait for the carriage for few minutes to slide over automatically
    now, remove the ink cartridges straight from the print head section.
  • Users are requested to work with cotton swabs dipped in hot water or may be a mixture of hot water and isopropyl alcohol should be applied to thoroughly clean the print head. Also all of its electronic contacts should be cleaned out on each ink cartridge entirely from deep inside.
  • Repeat this step until you find a complete clean off of all ink residue on the cotton swab.
  • Once finished, wait till it get dried up and replace the cartridges and check by printing whether the issue still happens to exists or not.

Related Blog How to fix Canon PIXMA 410 Cartridges Reset Error?

If the error still continues to exist then, there are two possible reasons and they are:

  • Defective ink cartridges
  • Problem lies in the print head and needs an immediate replacement

Call us at Canon Printer Support Number to fix your issues

Canon Printer Error Codes

Connect to our technicians at Canon Customer Support Number to experience proactive replies for all your Canon printer issues with the right kind of solution. We can be reached out 24*7 hours to help you overcome all types of Canon printer problems. So, call us now and get your issues solved as fastest as possible.

31Oct/17
Fix Canon Printers Error Code 5011

How To Fix Canon Printers Error Code 5011?

Canon printer error code usually occurs due to defect in cartridge holder which is completely stuck inside and as a result it generates the 5011 error code. The issue is targeted in various Canon printer models such as MP480, MP490, MX340, MX320, MX350, MP540, MP620, MP550, MP560, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MG2100, MG3100, MG4100 and MG5100. This is basically a kind of defective Printers issue which restricts users to go ahead with the scanning process. According to professionals troubleshooting steps are little bit difficult to apply.  Also the problem may arise from any type of faulty issues from the production or may be from the agitation while shipping was done.  Below we have provided various solutions to fix Canon Printers error code 5011.

Solutions to troubleshoot Canon Printers error code 5011

Solution 1: Try this first solution to remove the error code

  • Unplug the power supply first and then wait for at-least 5 minutes. Plug-in the power cord again.
  • Now, turn off the printer first and carefully open the cover to change the ink cartridge.
  • Now, turn on the power button and then, close the cover while initializing is being done.
  • Power off the printer again and hold the “power+cancel” button at the same time
  • Hold on the power button and then, release the “cancel” button
  • Press the “cancel” button for at-least 4 times and then, release both of them.

Solution 2: Try our second solution of you are failed to solve the error code with the above one

  • Here, one needs to check that there are no pieces of paper stuck inside the device, no matter even if it is about little object inside the printer.

Solution 3: this is another solution which is shown to resolve the error code

Carefully clean up all the encoder strip which will be found located just behind the carriage. it is used to run all the way from right to left

Solution 4: This is the last solution for this error ode

Unplug the printer and turn it off for at-least 3 minutes, then again power on it to perform a test process

Lift the lid from the printer slightly including your Printers. With the lid open, now turn on the printer and then, close that lid to check whether the issue has gone or not.

At last of nothing works out the, the device needs to be repaired

Related Blog: How To Fix Canon printer Error P03?

Canon Printer Error Codes

Call us at Canon Printers Support Number for resolving more such queries

Contact our technicians at Canon Customer Support Number to get the most suitable solution for all your issues. We are available 24*7 hours to bring users world-class tech support solutions. Our solutions are un-matched to experience for users and this has made us stand unique from others.

30Sep/17

How to Connect A Macbook With a Canon Wireless Printer

Today’s Wireless printing has become increasingly popular for the reason that it is simple and convenient. A wireless Canon printer permits the many computers to print facility from everywhere, at every corner of the place, either home or office without the required for wires. Even users of Canon Printer can easily connect to their network, through their devices without requiring entering a password.

Connecting to the devices via canon wireless printer is a quick and easy method for you via WPS, which stands for Wi-Fi Protected Setup. So, if your access point has a WPS button, then there is no problem. You can simply connect with a Canon Wireless Printer to your computing devices, such as a PC, Mac, Tablet or Smartphone. This article will explain you very simple Steps to Connect a Macbook with a Canon Wireless Printer. So you just need to follow the below steps to fix the problem.

Before starting the process to connect your Canon printer with a wireless network, make sure that you meet the following conditions:

  • Make sure that you have an access point (occasionally referred to as a router or hub) via which you get an Internet connection.
  • The access point must have a physical WPS push button available.
  • Make sure that your Mac is successfully connected to the Internet.

Steps to Connect A Macbook With a Canon Wireless Printer:-

  • First of all, turn ON the printer by pressing its Power button.
  • Go to Apple Mac, and then go to the top, left-hand corner. Then, hot on “System Preferences”.
  • Hit on “Printers & Scanners” icon.
  • Then tap on the plus “+” sign to add the printer.
  • Next, a new window will open, where you will need to tap on the “IP” icon at the top and fill out the information.
  • Then add the Canon printer to your Mac computer.
  • Once a Canon printer configured, and then it will appear in your printers list once configured.
  • Check your printer and see the list of the available printer showing your Canon printer. If yes it’s showing then print a test page to verify the printer is functioning correctly.

In this manner, you can easily Step to connect a Macbook with a Canon Wireless Printer.

Related Blog: How to fix Canon PIXMA 410 Cartridges Reset Error?

In case, if you have any doubt to follow the steps, then you can get immediate support with the proficient technicians.

Canon Printer Error Codes

Dial Canon Printer Customer Service Number To Receive Help 24×7:-

You can hassle free dial Canon Customer Service Number +1-855-789-0295 with the team of well-experienced and qualified techies, who are always available 24×7 to your help.  The technicians will give you comprehensive guidance to solve this problem, and & finest solutions to fix other sorts of Canon Printer related issues.You can also get support through Online Live Chat, Email, and Phone support.

29Sep/17
Canon Printers Error 042 or 5010

How to Fix Canon Printers Error 042 or 5010?

Canon printer gives the quality printer service, that’s why it’s used by the billions number of users, all across the world. But often the users face the technical issues while using the Canon Printer. If you are one of the Canon printer users and you are getting the message of error 042 or 5010 after each copy function, if yes then don’t worry about it. You have required is to resolve the error message immediately. The reason may be involved to happening this error includes Scanner, USB connections, and purging unit inside the Canon printer, etc. As defined by the team of Canon Pinter Technical Support team, the error could be fixed efficiently.  Here the blog will guide you to How To Fix Canon Printers Error 042 or 5010 easily. You just need to follow the given below simple steps to fix the error.

Solutions to Fix Canon Printers Error 042 or 5010

Solution 1:- Turn the Canon Printer ON

  • First of all, turn OFF your Canon printer.
  • Then unplug the power from the printer for at least 5-10 minutes.
  • While unplugged the printer, remove any paper from the unit.
  • Next, double check for any obstacle found in the unit or paper paths.
  • If no obstacle are found, then plug the power back in and turn the unit on.

Now, check the, if the issue persists, then go to the next solution.

Solution 2:- Check the Glass

  • Open the top of the printer that gives access to the part of the scanner.
  • If possible, then remove the glass from the top of the Canon printer.
  • When you observe the imaging unit, which digitizes documents, then fixed moves it.
  • Now, check the, if the issue continues, then go to the next solution.

Solution 3:- Check the Connection Light

  • Open the same side of the printer (way in to manipulate the scanner).
  • Then, if the part of scanner (digitizer) appear at the cables and connections on top.
  • Now, look carefully and abundant lighting which has not taken off or broken anytime.

After the above steps, if you don’t find a solution, then it’s best for you to get the service tool for your printer and reset the printer EEPROM for the printer you have.

Solution 4:- Reset the Device

If the device is not functioning properly or to clear memory, then you should do to reset it.

  • On the operator panel, press and hold the “ON/OFF” button for one second, until the display will go blank.
  • It may be essential to unplug the power cord if pressed the “ON/OFF” button, then does not shut off the printer.
  • Now wait for some time at least 15-20 seconds and then press the “ON/OFF” button again.
  • Wait until the device has completed its cycling process before submitting another job request.”

Check the, if the issue persists, then go to the next solution.

Solution 5:- Check Purge Unit Inside the Canon Printer

  • Open the printer from the top, and then try to move the cartridge over the center very gently with your fingers
  • Now move ahead and remove the power.
  • Find the space to the right where the carriage was and then you will see the purge unit. There will be two ink pads there and plastic wiper blades.
  • Carefully move the wiper blades very gently forward to confirm they have not become stuck, and then let them go back.
  • Make sure you don’t need to force anything, in case you find notice of any sticky ink residue that is avoiding the smooth movement of this part, get a paper towel dampened with hot water and blot these parts to loosen/clean.
  • Clean all around the top of the purge unit as well.
  • Next, very lightly press down on the ink pads and see if you can pop it back into place, about 1/4 of an inch.
  • Now, make sure that there is no paper jam wrinkled around the purge unit, very gently remove anything that you might see if you do.
  • Then plug in the printer and close the top.
  • Now check the error is gone.

Related Blog: How to fix Canon PIXMA 410 Cartridges Reset Error?

In case, if not, then you will need to be repaired. You should contact with experts for getting the help.

Need Help! Contact Now At Canon Customer Support Phone Number

You can hassle free dial Canon Customer Care Toll-Free Number in order to obtain online immediate help 24×7 days. A team of dedicated and experienced technicians works day and night to give you instant support to your Canon Printer issues. Get in touch with highly skilled techies and receive the comprehensive guide to this Canon problem. Also, you can receive the easy and reliable solutions to fix other kinds of Canon mishaps.

27Sep/17

How To Fix Pausing Issue In Canon Printers?

Canon printers are in fact the one of the most advanced printing device used by thousands of people across the world but it may sometimes suffer from unexpected issue and one such is“pausing” issue which happens continuously while trying to print. Reasons behind this problem is re installation the OS because of virus problems and also may be due to connectivity problems in the USB. Below are steps discussed to  Fix Pausing Issue In Canon Printers are well explained.

Steps to troubleshoot pausing issue in Canon printers

Step 1: Troubleshooting solutions

If you are working with the shared printer on home LAN then it will work absolutely fine from other computers as well. It is because there is no hang-up problems between the documents. Users are suggested to reinstall the printer drivers properly and then, enable its working mode properly. The next thing is to try to remove the driver and reinstall it. According to expert views, one can also try to print from safe mode.

Step 2: Check issues with multiple computers

Users working on computers and is sharing a parallel printer over a Windows workstations should be

taken care of. Because it’s just the reason behind the cause of this error which happens when you try to print a document. The problem is solved easily by rectifying the logging process onto the workstation where the printer is directly attached to as “Administrator” mode and removing the “pause” error afterwards. Another solution is simply to delete all the printers and reinstall or reshare them.

Step 3: Print job pauses checking mode

The last method which is suggested by expert team of technicians is simply to check for any pausing command given by you. This method is essential to get rid of the problem as fast as possible. Here are you are completely done

Related Blog: How to fix Canon PIXMA 410 Cartridges Reset Error?

Canon Printer Error Codes

Dial our technicians at Canon Printer Support Number to fix up your problems now

Get connected to our expert pool of talented technicians at Canon Printer Customer Support Number have us solve your Canon printer problems with all kinds of possible solutions available with us. We are easily reachable for our customers all day long to help them in solving out their problems on immediate request.

12Aug/17
Troubleshoot Canon Printer Error 4102

How to Fix Canon Printer Error 4102?

Using the Canon PIXMA 2520 is a great thing, to print a photo via it on 8.5×11 glossy paper gives users wonderful experienced. But, sometimes the users face the issue in the printer and received the error 4102 message. Well, the Canon Printer Error 4102 occurs when the media type and paper size are not set correctly.

When the error 4102 error, then users need to immediately fix it. As suggested by Canon Printer Tech Support this problem could be easily solved. So, the users don’t needs to worry about it. Here, the blog will guide very easy steps on you can Fix Canon Printer Error 4102. By just following the steps, that given mentioned.

Methods to Troubleshoot Canon Printer Error 4102

Method 1:-Change the Media Type or Paper Size Setting

First, you should try to press the printer’s [ON/RESUME] button to cancel printing, change the media type or paper size setting, and then print again.

Ensure that to see the different media types and paper sizes below: –

  • When the media type is set to Photo Paper Plus Glossy II:

Set the paper size to 4”x6” 10cm x 15cm (Windows)/4×6 (Mac), or 5”x 7” 13cm x 18cm (Windows)/ 5×7 (Mac).

  • When the media type is set to Glossy Photo paper:

Set the paper size to 4”x6” 10cm x 15cm (windows)/4×6 (Mac)

  • When the media type is set to Envelope:

Set the paper size to Envelope Com 10 (Windows)/Envelope #10 (Mac) or Envelope DL (Windows/Mac).

Related Blog: How to Fix Canon Hard Disk Error Code E602?

Method 2:- Advanced Solution-Manual Update Window

  • Go to your computer and log in as an administrator panel.
  • Then go to the “Start” button, and then choose “All Programs”, then “Accessories”, then “System Tools”, and then tap on “System Restore”.
  • When the new window opens then choose “Restore my computer to an earlier time” option and then tap on “Next” option.
  • Then pick-up the most recent system restores point from the “On this list, click a restore point” list and then tap on “Next” option.
  • Click “Next” option again on the confirmation window.
  • Then restart the computer when the restoration is finished.

If the above solution has not resolved your Canon Printer Error 4102, then you should contact with Canon customer support team to get fast response & other troubleshooting solutions.

Canon Printer Customer Support Phone Number Is Available 24×7 To Your Help:-

Dial Canon Printer Support Phone Number now, which is a toll-free number and available 24×7/365 days to your online help. By dialing this number, you will easily connect with the team of well qualified and experienced Canon Printer Customer Support team, who can give you comprehensive support & steps to fix this error. By experts help, you can achieve accurate and outstanding solutions to solve other kinds of any Canon Printer error or issues. Hence, contact now to get hasty Canon support & services.