Call On Our Technical Support Phone Number For Canon Printer

Canon MP495 Wi-Fi Setup | Introduce The Quick Setup Guide

Canon MP495 Wi-Fi SetupCanon MP495 is a wireless inkjet all in one printer, that is designed to provide resolutions up to 4888×1200. With the help of this Canon printer, you can easily adjust and correct the photos before printing them.

Apart from this, the Easy-Web Print Ex software helps you to combine and edit multiple web pages. However, to use these features, you need to know the proper Canon MP495 Wi-Fi setup procedure.

If you don’t have any idea about the setup procedure, then here you will get the steps that will make the printer functional.

How to Set Up Wi-Fi on Canon MP495? 

You can complete the setup procedure by using either the WPS method or the Standard method. Based on your preference you can choose among the 2 methods.

WPS Method:WPS Method to Set Up Wi-Fi on Canon MP495

 Before you start, the following condition must be met.

  • Your router or access point must have a WPS button. For that, check the user’s guide.
  • The network must use the WPA or WPA2 protocol. 

Now, implement the steps listed below:

Step 1

First, ensure that the Canon MP495 printer is turned on. After that, you should press and hold the Maintenance option for 5 to 10 seconds and ensure that the LED starts blinking.

Thereafter, press and hold the ‘Fit to Page option’ for sometimes. Wait for 2 to 3 minutes and then, press the WPS button.

Depending on the router, the position of the WPS button may vary. However, most of the time, you can see the WPS button at the backside of the router or the access point.

Step 2

The Wi-Fi lamp of the Canon printer will flash while it trying to connect to the access point. Once, the wireless connection has been successfully completed, then the LED light will be blinking for 3 seconds.

Now, you have to change the number to 1. Ensure, that the Wi-Fi lamp on the Canon MP495 printer is also lit.

Step 3

Sometimes, Error E,2,1 shows on the display. If after pressing the WPS button the setup procedure does not get complete, within 2 minutes, then this error code can occur. 

In such a condition, you should either press the ‘Black’ or the ‘Colour’ button in order to remove the error. After that, repeat the above two steps.

Step 4

In case, Error E, 2, 3 appears on the display, then it simply means that multiple access points are recognized. In such a scenario, you need to wait for sometimes and again try to configure the WPS settings.

Step 5

Once you have successfully applied the above four steps, now its time to confirm that the Canon MP 492 pinter is connected with the Wi-Fi network.

For that, first, ensure that the Canon printer is turned on. After that, insert a set of A4 paper in the input tray. Next, hold down the Maintenance button until the LED lights start blinking.

After that, press the ‘Black’ or ‘Colour’ button and print out the network setting report. On the printing report, check that the Link Status whether it indicates Active and the SSID is the correct name of the wireless network.

Standard Connection:Standard Connection to Set Up Wi-Fi on Canon MP495

This is another way that you can implement to connect the Canon MP495 printer to the Wi-Fi. To do so, take a glance at the following points:

  1. Insert the installation CD on your device. Instantly an installation screen will appear on the display, choose Wireless Connection.
  2. Turn on the Canon printer and ensure that the light is flashing blue.
  3. Now, tap on Connect to the Network option
  4. On the next page, choose WPS for the automatic wireless connection.
  5. Press and hold the Wi-Fi button until the orange light blinking for 2 times.

Click on Next and provide the required information in order to complete the setup and installation procedure.

People Also Ask

  • How to Reset the Printer to the Factory Settings?

    At first, turn off the device. Remove the power cable from the printer. Wait for 30 to 40 seconds and again reconnect it. 

    Now, turn off the printer and after that, you should hold the Resume button for 20 to 30 seconds. Then, the Attention lights will be turned on. Finally, release the Resume button.

  • How can you change the Wi-Fi on the Canon Printer?

    Ensure that the Canon printer is On. Go to the Home Screen and from there choose the Setup option. Now, choose the Settings option. Under Settings, scroll down and select the Device Settings option.

    Thereafter, choose the LAN Settings button. Tap on the Wireless Direct option. Thereafter, configure the settings. Finally. Press the Home button.

  • How do you Connect the Canon Printer to the Laptop?

    At first, put one end of the USB cable in the USB port on the Connection panel of the printer. Another end of the cable must be connected to the USB port of the computer. 

    Furthermore, you have to turn on the Canon printer. Next, click on the Start icon and choose Control Panel from the available option. Under the Control Panel, select the ‘Hardware and Sound’ option. 

    Now, select the ‘Add a Printer’ option. Afterward, choose the printer port for your connection. Move to the Driver window and click on the Canon printer option. Now, choose the specific model.

    Select whether or not to share the Canon printer with other devices on the same network. Lastly, tap on the Finish option.