Monthly Archives: October 2018


Troubleshoot Canon Printer Error 6A81 | Technical Solution Is A Call Away

Canon printers are known for its durability and reliability. Any obstruction within the printer can cause Canon Printer Error 6A81 irrespective of the printer model.  This error usually occurs due to the purge unit defect, where the sponge was not properly placed and somehow clogging the print head. It further blocks it’s way and doesn’t allow the print head to travel back to its initial position. So, if you aren’t aware of the reasons behind its occurrence, check out this article. It includes a few reasons behind this printer problem and also effective solutions to troubleshoot error 6A81.

Canon Printer Error 6A81

What Causes Canon Printer Error 6A81?

Canon printer error 6A81 occurs due to a possible hindrance in your printing device. To know the possible causes of getting this printer error, go through the following information. It will help you to figure out the symptoms of getting the 6A81 error in Canon printers.

  • Not maintaining proper cleanliness of your Canon printer can cause this error. Especially, when there is a paper jam due to dust or any other elementary obstacle.
  • If your printer has dried ink issue,  it can halt the position of the print head. Thus, it can prevent both the print head and the cartridge units to travel back to its original place.
  • There can be issues with the purge wiper, which can block its back and forth movement. So, if the purge unit is stuck in one place, your printer can generate this 6A81 error.
  • In case there is a foreign component or paper jam issue inside the printer device, you can still get this problem. So, look for paper pieces or dust particle inside the paper tray and on the rollers section which may cause this issue.

How To Resolve Error 6A81 In Canon Printer?

If you want to fix Canon printer error 6A81, the first thing you can do is to reset the device once. If the reset option doesn’t work then apply other three solutions as mentioned below.

1. Reset Printing Machine

To reset Canon printer, press and hold down the ‘Power’ switch for few seconds and wait for the device to shut down. Then disconnect the printer from your PC and unplug the power cord. Once again hold the On/Off button and place the power cord back into the socket. Also, re-connect the Canon printer to the computer and turn on the power switch.

2. Clear  Paper Jam And Clean Components

Take help of torchlight or any light source to check the inside of the printer including paper trays. Search for any papers crumbs or unnecessary object and remove it. Test with a sample printout to check whether Canon printer error 6A81 is resolved.

3. Remove Obstacles And Unstuck Purge Unit

As mentioned in the causes section, the purge unit inside the Canon printer can be stuck and cause this issue. Hence, use any long equipment like a screwdriver and clear the blockages around the purge section.

4. Thoroughly Clean Printer To Remove Dust

Use a clean dry cloth to clean inside the printer and remove dirt from the surface of the rollers. It will allow you to feed the pages correctly into the paper tray and the rollers can move freely during the printing task.

Related Blog:- Easy Ways To Resolve Canon Printer Error 5b00

Dial Canon Toll-Free Number +1-855-790-7845 for Instantaneous Assistance:-

Canon Printer Support

If you aren’t satisfied with the above fixes or can’t identify the reason behind Canon printer error 6A81, get in touch with the experts. We provide technical services to fix any kind of errors in your Canon or other printers including the error code 6A81.

To talk to the certified printer technicians and place service request, call Canon Printer Support Number. If you are unable to reach the professionals through a call, send your queries at our email ID. Also, you can chat with our support team through the live portal.


How to Troubleshoot Canon MX922 Print Head Errors?

Since the inception of printers, it has seen a lot of changes and it continues to do so till date. Canon is known for producing high performing and top quality printers over the years. One such printer is the Canon MX922. It is the all-in-one printer due to the range of features it provides to users. However, with all its great features, there are issues which creep in from time to time. One common issue that the users often complain about is the Canon MX922 Print Head.

This print head issue is also known as the printer 1403 error. This error message usually appears when the users attempt to print. You may receive a message pop up which says the printer is not installed properly. Also, an incorrect printer message may also display which indicates the print head may not be compatible with your printer.

Canon MX922 Print Head

Probable reasons for the Canon MX922 Print Head Issue

Here is a list of some of the common causes which result in the malfunctioning of the MX922 printer head.

  • Usually, when the print head is not properly installed in the printer, it leads in the print head not working as expected.
  • The print head problems can also occur due to an internal error in the printer or the print head.
  • The MX922 print head 1403 is an indication that the print head might be incorrect. It is probably not compatible with your printer.

These are some of the common causes which result in this issue. However, there are multiple ways you can fix Canon Printer 1403 Error.

Excellent tricks to Fix the Print Head bugs

The error 1403 is usually a symptom of an internal error in the printer. Here are a couple of tried and tested methods which will likely resolve the issue occurring in your print head.

Method 1: Replace the Ink Cartridge

  1. First of all, open up the printer and wait until the cartridge slides over.
  2. Now take out the cartridges from the printer and begin the cleaning process.
  3. With the use of cotton dipped in hot water, clean the print head properly. Make sure to clean the other electronic portions in the ink cartridge as well.
  4. Keep repeating this process until the time there is no drop of ink coming off the ink cartridge.
  5. Allow the printer to dry out after this.
  6. Finally, replace the cartridges and print something from the printer now.

Method 2: Resolving Internal Issues in the Printer

  1. To begin this troubleshooting method, first of all, power on the Canon printer.
  2. Next, Open up the paper tray and pull up the scanning unit. Once done, the print head will advance into a replacement position.
  3. After this, open the inner cover and remove the ink tank by simply pressing the tabs of the tanks.
  4. Lift up the of the print head lock lever and then slightly tilt the print head towards the front side of the print and then take it out with care.
  5. After doing the previous step, progress by putting the print head in the canon mx922 software holder area.
  6. Insert back the ink tanks in the printer properly and close the scanning cover appropriately.
  7. Finally, try to print something from your printer.

Hope above methods are likely to fix your canon mx922 print head error. If the problem persists, then the printer requires service.

Related Blog:- How To Resolve Canon Printer Error B200?

Dial Canon Printer Support Number USA +1-855-790-7845 (toll-free):-

Canon Printer Support

Canon MX922 is a delicate printer which performs several printing tasks with high-quality output. Hence, if the Canon Mx922 error still exists, then avail expert help from the printer experts at Canon Customer Service.

We have a bunch of highly experienced technical professionals who are equipped with all the knowledge related to Canon printers. They will ensure your issue is resolved quickly. Get in touch with our experts anytime by calling in our toll-free Canon printer helpline number and receive suitable solutions to your errors.

You may also email us your queries or inquire for quick doorstep service details at our mail id. Customer satisfaction is our priority and this is why we are constantly providing support in a 24×7 manner. In terms of servicing, we offer top quality service to our customers at a very affordable rate. The motto of our support executives is to provide you with accurate solutions to fix the issues on a long-term basis.


Easy Ways To Resolve Canon Printer Error 5b00

Canon printers are one of the most reliable printers in the market. They are quick and don’t cause much trouble. However, since the use of  Continuous Ink System, some of its models have started facing issues. One of the most common problems you may face with these models is Canon printer error 5b00.

There is no doubt that having a CIS or Continuous Ink System in your printer makes it more efficient and cost-effective. You get more prints for less price along with better quality.

But it has some disadvantages as well. If a regular cartridge prints 200 pages, CIS makes the printer exceed this number. Sometimes, it can also cause ink spillage in the printer, in turn, filling up the printer pads, resulting in 5b00 error in canon printers.

Canon printer error 5b00 might also be the result of error code 5105 which means ink cartridges are not fully seated in the printer. Here are a few solutions for troubleshooting this error with the Canon printer.

How to Fix Canon Printer Error Code 6502

Set Your Printer To Factory Setting

You can use this method to treat almost all errors across all the printers. Reverting your printer to its original settings is the ultimate solution for resolving Canon printer error 5b00.

Turn off your printer and hold down the stop or reset button. While you are holding down the stop button, press the power button of your printer and turn your printer on and off again. Release the stop button and press it twice in quick succession while still pushing the power button. Wait till you see rest on the screen. Now press the stop button five times consequently and quickly press the power button twice.

This should reset the printer to the factory settings, resolving the error.

Running The Printer In Service Mode

Running the Canon printer in service mode will make the ink absorber pad is empty for it rather than full. And if you can open your printer and clean the deposits of in, it will help you in fixing the issue. You can use napkins for this purpose.

Turn on your printer and press the menu button. For putting the Canon printer in service mode, first press Scan, then Copy and then again press the Scan button. Make sure you follow the exact order.

Now you will need to press the + keys and keep pushing it until you reach the option of counter access. When you see that option, press Ok and you will see a page counter showing the number of pages you have printed in total. Push Ok and then Copy button.

Lower the score to zero by pressing – button and press Ok. Now, use the + button again to get to the Scan Page count and set it to zero as well. navigate to the ABS-M DONT COUNT option and repeat the action as well, resetting back at zero. When you are done with that, press OK and then press the stop button. Now power off your printer and turn it back on.

Related BlogGet Resolve Canon Printer Error 5200

Other Method

Some of the users have reported a quick method that has worked for them. No harm in trying, is there?

To resolve  Canon printer error 5b00, hold down the power button while your printer Successively to the power. Now, in quick succession, press the cancel button six times and release all the buttons you are holding. Again, press the cancel button 5 times quickly, successively press the power button once. Now turn off the printer and then fire it up back.

If Still Facing Canon Printer Error 5b00, Contact Us at +1-855-790-7845

Canon Printer Support

If you are unable to resolve the problem using the above-mentioned solutions, you can contact our Canon Printer Support experts on our tollfree helpline number +1-855-790-7845. You can also live chat with our Canon printer experts or email us. Either way, you will get your desired solutions in the least possible time. So, leave all your queries with us and experience flawless printing with Canon Printer.