Monthly Archives: October 2017

Fix Canon Printers Error Code 5011

How To Fix Canon Printers Error Code 5011?

Canon printer error code usually occurs due to defect in cartridge holder which is completely stuck inside and as a result, it generates the 5011 error code. The issue is targeted in various Canon printer models such as MP480, MP490, MX340, MX320, MX350, MP540, MP620, MP550, MP560, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MG2100, MG3100, MG4100 and MG5100. This is basically a kind of defective Printers issue that restricts users to go ahead with the scanning process. According to professionals troubleshooting steps are a little bit difficult to apply. Also, the problem may arise from any type of faulty issues from the production or maybe from the agitation while shipping was done. Below we have provided various solutions to fix Canon Printers error code 5011.

Solutions to Troubleshoot Canon Printers error code 5011

Solution 1: Try this first solution to remove the error code

  • Unplug the power supply first and then wait for at least 5 minutes. Plug-in the power cord again.
  • Now, turn off the printer first and carefully open the cover to change the ink cartridge.
  • Now, turn on the power button and then, close the cover while initializing is being done.
  • Power off the printer again and hold the “power+cancel” button at the same time.
  • Hold on the power button and then, release the “cancel” button.
  • Press the “cancel” button for at least 4 times and then, release both of them.

Solution 2: Try our second solution if you failed to solve the error code with the above one

Here, one needs to check that there are no pieces of paper stuck inside the device, no matter even if it is about little objects inside the printer.

Solution 3: This is another solution which is shown to resolve the error code :

Carefully clean up all the encoder strip which will be found located just behind the carriage. it is used to run all the way from right to left.

Solution 4: This is the last solution for this error code :

Unplug the printer and turn it off for at least 3 minutes, then again power on it to perform a test process

Lift the lid from the printer slightly including your Printers. With the lid open, now turn on the printer and then, close that lid to check whether the issue has gone or not.

At last, if nothing works out, the device needs to be repaired

Related Blog: How to Fix Canon Printer Error Code 2, 140, 21?

Call us at Canon Printers Support Number for resolving more such queries

Contact our technicians at Canon Customer Support Number to get the most suitable solution for all your issues. We are available 24*7 hours to bring users world-class tech support solutions. Our solutions are un-matched to experience for users and this has made us stand unique from others.

Troubleshoot Canon Printer Error 4102

How To Fix Canon PIXMA MX320 Printer Error Code 5B00?

The error code is usually cause due to defective ink color and it is advised to replace printer’s ink which will be usually black in color. As it is a multifunction inkjet Printer, scanner, copier and fax machine, such issues can sometimes arise while working with it. I have refilled the cartridges many-many times. While working with it users will comes across an error message for the ink being supposedly empty.  But still they will be able to print without problems. However, when they are receiving a fax then, it won’t let them print at all. Also, a fax will be send to them but inspite of this, it won’t allow them to print the document at the end. Below are solutions discussed to fix Canon PIXMA MX320 Printer Error Code 5B00.

Steps to Troubleshoot Canon PIXMA MX320 Printer Error Code 5B00

Solution 1: Try our First Solution

  • Turn off the printer first and then, press as well as hold the “Stop/Reset” button
  • Users are advised to tap the “Power On” button now
  • While holding the “Power On” button, you need to release the “Stop/Reset” button slowly
  • Press twice the “Stop/Reset” button while you are holding the “Power On” button.
Related Blog: How To Fix U051 Error In Canon Printers ?
  • Release the “Power On” button now and wait until an “idle” message is completely displayed on the screen. It will take approximately 60 seconds.
  • When “idle” will appear on the screen then, open the top cover of the printer to expose cartridges easily.
  • Lift up the cover of the printer’s cartridge holder and then, slowly take out both black as well as colored cartridges.
  • Return the cover of cartridge holder and then, turn off the printer
  • Turn the printer on again
  • After the printer has been initialized, just return the cartridges.

Solution 2: if the Above Solution Did not Work out then, Try this one out

  • Reset the Canon printer to get rid of the error faster.

Call us at Canon Printer Support Number +1-855-790-7845 to Fix more such issues by our Canon Technicians

Connect to our technicians at Canon Printer Support to get your issues solved by our expert technical team. We are available for them 24*7 hours to assist them the right kind of solution to their Canon printer issues. Our unique way of delivering solutions has made us stand distinguished from other competitors. So, call us now to fix your issues with us.


How To Fix Canon Printers Error U051 ?

If it is about the error U051 then there are two different scenarios related to this error message. The first one is that the print head is not installed and thus it is displaying the error message ‘U052’. This type of print head is installed inaccurately which calls for such error message. Well, the second possible cause is the print head is installed but not functioning properly.  This clearly signifies about a “Wrong Print Head Installed” issue. Follow below steps to Fix U051 Error in Canon Printer.

Steps to Fix U051, U052 ,U053, U059 Error in Canon Printers

Step 1: Reset the Print Head
  • Make sure that the printer is turned on. Open the “Paper Output Tray” carefully.
  • Lift up the Scanning Unit which is a type of cover and hold it to easily open with the Scanning Unit Support. You will see that the print head will automatically move to its appropriate replacement position.
Step 2: Remove all of the ink tanks properly
  • Push the tab (B) and then, carefully lift the ink tank to remove it completely
  • Be careful not to touch the Print Head Lock Lever (C) while you are removing ink tanks.
  • Once you have removed all ink tanks of the printer, raise the print head lock lever carefully.
  • Tilt the print head slight towards the front of the printer device and then, lift it out gently.
  • Before moving next step, check for the carriage area with the purpose of removing any packing material, torn paper, etc. and remove them if found any
    Tilt the Print Head and place it appropriately. Lower the Print Head Lock Lever (E) slightly
Related Blog: How To Fix Canon printer Error P03?
Step 3: Insert all ink tanks into the print head
  • Insert the front end of the printer’s ink tank directly in the Print Head in a slant position.
  • Make sure that while placing it in its appropriate position, the ink tank has properly been matched to the label.
  • Press the mark button which is the “Push” button located on the ink tank till the ink tank snaps into its original place.
  • Make sure that the ink lamp lights up in red color.
  • Lift up the “Scanning Unit (Cover)” now to slightly set the Scanning Unit Support back to its original place and gently close the “Scanning Unit (Cover)” now.

Canon Printer Error Codes

For more such problems, call us at Canon Printer Support Number to fix them immediately

Get connected to us at Canon Printer Customer Care Number +1-855-790-7845 to resolve issues of Canon printer by our technicians with the most appropriate solution. We are backed by expert technical team who are always available for their customers to assist them in solving their issues.


How To Fix Canon printer Error P03?

Canon printers are the world’s most renowned printing device preferred by thousands of users worldwide but sometimes one may come across this issue and one such among them is error P03. The error is generally due to a line feed problem. Further when this error happens, users will be able to see a flashing light for at-least 3 times for when they are working with the on as well as off button of the screen. There are solutions discussed to fix the Canon printer error P03 that are discussed in details

Solutions to troubleshoot Canon printer error P03

Solution 1: try out this solution

Verify whether the paper tray is accurately placed or not. If it is the case where any type of object is placed in front of the machine then just remove it.

Solution 2: if you are not satisfy with the above solution then, try this out

Search for various small pieces of paper that are there inside in the Canon printer. Also do check whether there is any object inside.

Solution 3: This is the third solution which users can also try

Power off the printer first and then wait at-least for 30 seconds. Power on the device again. Check for the issue if it exists further or not.

Solution 4: Check for all your faulty parts

These issues can also take place if there are any kind of faulty printer parts, below are few lists of them

  • Timing sensor unit QM2-2683
  • Timing slit disk film QC1-6229
  • Feed roller ass’y QL2-0925
  • Platten unit QM2-2923
  • Logic board ass’y QM2-3078
  • Paper feed motor QK1-1502

I hope all your problems have been solved by approaching the above four alternate solution. If not then get in touch with our technicians now at below contact details

Related blog How to Fix Canon Printers Error 042 or 5010

Call us anytime at Canon Printer Support Number to fix more such problems

Get connected to our technicians at Canon Support Number where technicians are always available for their customers and help them deliver the best in class tech support solutions, we are backed by a group of talented technicians who are always a step ahead in fixing complex to complex kinds of issues faster.